OEM |
Part # |
Description |
Weight | Qty | ||
|---|---|---|---|---|---|---|
| WIRTGEN AMERICA | 21019 | SLIDING RAIL | 3.4 | 1 | ||
| WIRTGEN AMERICA | 21021 | SLIDING RAIL | 32 | 1 | ||
| WIRTGEN AMERICA | 2102561 | WIRE HARNESS ASM LH CARLSO | 2.6 | 8 | ||
| WIRTGEN AMERICA | 2102781 | MOUNTING DEVICE | 0.4 | 2 | ||
| WIRTGEN AMERICA | 2103350 | WELDMENT LH CYL MOUNT | 35 | 2 | ||
| WIRTGEN AMERICA | 2104551 | SIDE COVERING | 35 | 1 | ||
| WIRTGEN AMERICA | 2104979 | METAL PLATE | 0.9 | 2 | ||
| WIRTGEN AMERICA | 2105080 | METAL PLATE | 1.6 | 2 | ||
| WIRTGEN AMERICA | 2105208 | BEARING | 0.5 | 2 | ||
| WIRTGEN AMERICA | 2105541 | WIRE HARNESS LIMITING LIGH | 0.6 | 1 | ||
| WIRTGEN AMERICA | 2105561 | WELDMENT CAPTURE ROLLER MO | 7.8 | 4 | ||
| WIRTGEN AMERICA | 2105665 | WATER TANK FILLING REAR | 120 | 1 | ||
| WIRTGEN AMERICA | 2105747 | WIRE HARNESS (ENGINE) | 0.2 | 4 | ||
| WIRTGEN AMERICA | 2107128 | GROUND STRAP | 0.1 | 1 | ||
| WIRTGEN AMERICA | 2107373 | PRESSURE-RELIEF VALVE | 3 | 6 | ||
| WIRTGEN AMERICA | 2107880 | SEAL | 0.1 | 1 | ||
| WIRTGEN AMERICA | 2108539 | REPAIR KIT GENERATOR BRACK | 6 | 2 | ||
| WIRTGEN AMERICA | 2109136 | WIRE HARNESS | 0.2 | 1 | ||
| WIRTGEN AMERICA | 2110162 | NONRETURN VALVE | 0.2 | 1 | ||
| WIRTGEN AMERICA | 2110180 | COVER 4X156X112 DIN1542 ST | 0.6 | 1 | ||
| WIRTGEN AMERICA | 2110463 | CHECK VALVE RS-Z T TO A / | 0.7 | 10 | ||
| WIRTGEN AMERICA | 2110558 | SET OF SEALS | 0.6 | 1 | ||
| WIRTGEN AMERICA | 2111232 | PRE ASM | 1.6 | 1 | ||
| WIRTGEN AMERICA | 2111378 | WIRE HARNESS | 0.2 | 1 | ||
| WIRTGEN AMERICA | 2111956 | COVER | 0.8 | 1 | ||
| WIRTGEN AMERICA | 211230 | TANK CAP WITH LOCK | 1.2 | 2 | ||
| WIRTGEN AMERICA | 2117254 | AUGER EXTENSION KIT 2X0.65 | Exceeds 150 lbs.** | 2 | ||
| WIRTGEN AMERICA | 2119874 | TUBE 28X1.5 | 0.8 | 5 | ||
| WIRTGEN AMERICA | 2119933 | DRUM FB600 HT11 LA20 FCS | Exceeds 150 lbs.** | 1 | ||
| WIRTGEN AMERICA | 2121217 | SLEEVE | 3 | 2 | ||
| WIRTGEN AMERICA | 2122331 | COVERING PART | 8.4 | 1 | ||
| WIRTGEN AMERICA | 2123276 | INSULATION PLATE | 0.2 | 1 | ||
| WIRTGEN AMERICA | 2123601 | SCREED PLATE WM BOLT ON EX | 78 | 5 | ||
| WIRTGEN AMERICA | 2125413 | STICKER | 0.1 | 1 | ||
| WIRTGEN AMERICA | 2125504 | CONNECTOR SHELL | 0.1 | 2 | ||
| WIRTGEN AMERICA | 2125566 | PRESSURE-RELIEF VALVE | 0.4 | 2 | ||
| WIRTGEN AMERICA | 2126506 | RM-MAIN CTRL. VAWA UNPROGR | 35 | 1 | ||
| WIRTGEN AMERICA | 2126821 | MOLD BOARD BOLT ON EXT 0.6 | 76 | 1 | ||
| WIRTGEN AMERICA | 2126896 | FOOTBOARD | 55 | 2 | ||
| WIRTGEN AMERICA | 2129395 | RUBBER PLATE | 1 | 1 | ||
| WIRTGEN AMERICA | 2129514 | FUEL FILLING | Exceeds 150 lbs.** | 1 | ||
| WIRTGEN AMERICA | 2129653 | DRUM TURNING JIG | 80 | 2 | ||
| WIRTGEN AMERICA | 2131116 | PLATE LEFT SIDE | 8.6 | 1 | ||
| WIRTGEN AMERICA | 2132748 | SUPPORT | 16 | 3 | ||
| WIRTGEN AMERICA | 2132866 | FRONT WINDOW | 13.6 | 1 | ||
| WIRTGEN AMERICA | 2132945 | PLATE RIGHT SIDE | 8.6 | 1 | ||
| WIRTGEN AMERICA | 2133761 | PIPE LINE | 0.6 | 2 | ||
| WIRTGEN AMERICA | 2134241 | METAL PLATE | 0.2 | 4 | ||
| WIRTGEN AMERICA | 2134278 | INTERFACE | 0.6 | 2 | ||
| WIRTGEN AMERICA | 2134647 | PLATE RIGHT SIDE | 34 | 1 | ||
| WIRTGEN AMERICA | 2134659 | STRUTTING | Exceeds 150 lbs.** | 1 | ||
| WIRTGEN AMERICA | 2135328 | LINKAGE | 0.1 | 1 | ||
| WIRTGEN AMERICA | 2136006 | METAL PLATE | 3 | 1 | ||
| WIRTGEN AMERICA | 2136736 | ANTI-SLIP COVERING | 0.1 | 1 | ||
| WIRTGEN AMERICA | 2136776 | HY-GEAR-PUMP WP09A1B-160-L | 6 | 2 | ||
| WIRTGEN AMERICA | 2137795 | COVER PLATE | 1.6 | 1 | ||
| WIRTGEN AMERICA | 2138093 | PLUG | 0.2 | 1 | ||
| WIRTGEN AMERICA | 2138115 | STICKER | 0.1 | 2 | ||
| WIRTGEN AMERICA | 2138493 | STABILIZER ASM | 19.4 | 3 | ||
| WIRTGEN AMERICA | 21385 | PRESSURE RELIEF VALVE | 1.6 | 1 | ||
| WIRTGEN AMERICA | 2138967 | CONVEYOR BELT B850 | Exceeds 150 lbs.** | 2 | ||
| WIRTGEN AMERICA | 2138975 | PLASTIC BAG | 0.6 | 2 | ||
| WIRTGEN AMERICA | 2138999 | ROUND CAPTURE WHEEL | 10 | 3 | ||
| WIRTGEN AMERICA | 2139357 | NOZZLE HOLDER | 2.4 | 4 | ||
| WIRTGEN AMERICA | 2139783 | METAL PLATE | 16 | 1 | ||
| WIRTGEN AMERICA | 2140238 | METAL PLATE | 1.5 | 3 | ||
| WIRTGEN AMERICA | 2140633 | BELL CRANK | 1.8 | 1 | ||
| WIRTGEN AMERICA | 2141501 | BRACKET | 1.8 | 1 | ||
| WIRTGEN AMERICA | 2141529 | BRACKET | 2 | 1 | ||
| WIRTGEN AMERICA | 2141812 | WELDMENT RIGHT PIVOT ARM | 105 | 4 | ||
| WIRTGEN AMERICA | 2142035 | METAL PLATE | 1 | 5 | ||
| WIRTGEN AMERICA | 2142423 | RUBBER BEARING | 0.4 | 5 | ||
| WIRTGEN AMERICA | 2142764 | WELDMENT RH TUBE RAM | 37 | 3 | ||
| WIRTGEN AMERICA | 2142961 | DISTANCE CONTROL | 95 | 2 | ||
| WIRTGEN AMERICA | 2143343 | GROOVE RING | 0.1 | 10 | ||
| WIRTGEN AMERICA | 2143411 | LINKAGE | 0.4 | 1 | ||
| WIRTGEN AMERICA | 2143872 | BOLT | 0.3 | 2 | ||
| WIRTGEN AMERICA | 2144929 | HEATING | 12.4 | 4 | ||
| WIRTGEN AMERICA | 2145973 | SUPPORT | 1.2 | 4 | ||
| WIRTGEN AMERICA | 2146589 | STICKER KIT | 2 | 1 | ||
| WIRTGEN AMERICA | 2147356 | SQUARE BAR STEEL | 4 | 2 | ||
| WIRTGEN AMERICA | 2147378 | BOLT | 3.4 | 5 | ||
| WIRTGEN AMERICA | 2147611 | BOLT | 0.4 | 2 | ||
| WIRTGEN AMERICA | 2147794 | METAL PLATE | 1.6 | 2 | ||
| WIRTGEN AMERICA | 2147824 | METAL PLATE | 0.2 | 2 | ||
| WIRTGEN AMERICA | 2148523 | PRE STRIKE OFF WELDMENT | 52 | 1 | ||
| WIRTGEN AMERICA | 2149017 | FOOTBOARD | 80 | 1 | ||
| WIRTGEN AMERICA | 2150466 | PIPE | 0.6 | 1 | ||
| WIRTGEN AMERICA | 2150648 | WIRE HARNESS | 0.1 | 1 | ||
| WIRTGEN AMERICA | 2151229 | BOLT | 0.1 | 2 | ||
| WIRTGEN AMERICA | 2151231 | BOLT | 0.1 | 4 | ||
| WIRTGEN AMERICA | 2151292 | CONNECTING CABLE | 0.6 | 3 | ||
| WIRTGEN AMERICA | 2151295 | PLUG SOCKET | 2 | 1 | ||
| WIRTGEN AMERICA | 2153011 | METAL PLATE | 1 | 5 | ||
| WIRTGEN AMERICA | 2153403 | STARTER | 80 | 3 | ||
| WIRTGEN AMERICA | 2153681 | COVER | 13.6 | 1 | ||
| WIRTGEN AMERICA | 2154908 | BEARING | 43.2 | 1 | ||
| WIRTGEN AMERICA | 2154951 | CONTROLLER | 14.4 | 1 | ||
| WIRTGEN AMERICA | 2154952 | ELEC VALVE ACTUATOR S/N | 17.4 | 1 | ||
| WIRTGEN AMERICA | 2154959 | PRESSURE TRANSDUCER | 0.8 | 1 | ||
Displaying 501 -
600 of 1961
Vintage Parts manages thousands of high quality new parts received directly from WIRTGEN AMERICA. These parts are available for sale through WIRTGEN AMERICA authorized dealer. Research VPI’s availability for the part and then contact your local dealer. Please let them know that you found the part available on the VPARTSINC.COM website and they will be happy to order you the part. The dealer can even have the part drop-shipped to your location.
*This item is new to Vintage Parts and the weight has not been validated.
**This item exceeds 150 lbs and requires special shipping.
Please call Customer Service at 877-846-8243 to place your order.
